|
|
 |
| |
|
CCTV Cameras |
|
|
| Model: RMC-918 |
|
| |
|
|
The RMC-918 is a low-cost, high-performance colour camera from RMS Security. The RMC-918 is available with either a 1/3” or a ¼” CCD sensor. While the ¼” sensor gives a picture resolution of 500x582 pixels, the 1/3” sensor results in a picture resolution of 752x582 pixels.
Featuring a minimum signal-to-noise ratio of 48dB, the RMC-918 is capable of supporting both DC as well as Video-controlled Lenses. Other features include automatic backlight compensation, white balance and gain control. Operating on a nominal 12 VDC, the camera draws just 110mA.
Designed for use with CS-mount lenses, the camera accepts C-mount lenses with an adapter-ring. With external dimensions (without lens) of 139(L) x 66(W) x 58(H), it weighs just 316 grams. |
|
|
| |
|
| Model: RMC-2518 |
|
| The RM2518 from RMS Security is a unique CCTV colour camera with built-in zoom. This camera uses a 1/3” Sony CCD sensor to give a high quality picture with a resolution of 752 x 582 pixels.
The 3.9 – 85.8 mm lens, being an integral part of the camera, does away with the need for purchasing lenses separately. Featuring a zoom factor of 22X, the camera can work with light levels as low as 0.01Lux.
Besides shutter speeds of 1/50 to 1/100,000 sec, and aperture F1.6- F3.7, the camera also features automatic focusing, automatic white balance and internal synchronization. All control settings are through an array of push buttons at the rear of the camera.
|
 |
| |
|
|
| |
|
CCTV Wireless Converter |
Model: RMC-401D |
If routing a coaxial cable to a particular CCTV camera appears is giving you nightmares, then the RMC-401D is the answer to your problems. This 78 x 92 x 23mm gadget mounts directly on to the BNC output socket of any camera and transmits the video signal wirelessly. In case the camera supports audio, the audio signal will also be transmitted!
The converter, which comes complete with a receiver and a power adapter, draws its own power from the source supplying power to the camera. Operating on the 2.4 GHz band, the converter can be used on any one of four selectable channels. The receiver, on the other hand, is capable of receiving all four channels, individually or sequentially.
Weighing just 25gms, the converter has a power output of 10mW. The transmission range may vary according to weather, location, interference and building construction.
|
 |
| |
|
| |
|
|
